Shenzhen LCS Compliance Testing Laboratory Ltd.

Room 101/201, Building A, and Room 301, Building C, Juji Industrial Park, Yabianxueziwei, Shajing Street, Bao'an District, Shenzhen, Guangdong, China

Tel: 86-755-82591330
Fax: 86-755-82591332

As detailed in the Laboratory Accreditation Certificate No. CNAS L4595 dated 15.01.2020 and the attached appendices for the scope of accreditation and excluding items issued by the China National Accreditation Service for Conformity Assessment (CNAS) dated 31.03.2020.

Classes of Electrical Products			Standards Applicable
	Plugs
		2-pin reversible plugs which are designed for connecting to a shaver supply unit conforming to BS 3535 Part 1	EN 50075*
		3-pin 13A plug	BS 1363-1* BS 5733*
		3-pin 5A plug, 3-pin 15A plug	BS 546* BS 5733*
		IEC plug (special adaptor to be added to convert the plug for compliance with BS 5733, BS 546 or BS 1363 Part 1)	IEC 60884-1*
	Adaptors
		5A Adaptor, 15A Adaptor	BS 546*
		13A Adaptor	BS 1363-3*
	Extension Units
		For plug portion	BS 546* BS 1363-1* BS 5733*
		For socket portion	BS 546* BS 1363-2*
	Switches for Appliances and Automatic Controls for Electrical Household Appliances
		Control circuit devices	IEC 60730-1*
		Switches for appliances	IEC 61058-1*
	Household and Similar Equipment
		Household and similar electrical appliances	IEC 60335-1*
		Vacuum cleaners	IEC 60335-2-2*
		Electric dry irons	IEC 60335-2-3*
		Electric shavers	IEC 60335-2-8*
		Oral hygiene appliances	IEC 60335-2-52*
		Insect killers	IEC 60335-2-59*
		Air-cleaning appliances	IEC 60335-2-65*
		Fixed immersion heaters	IEC 60335-2-73*
		Portable immersion heaters	IEC 60335-2-74*
		Humidifiers	IEC 60335-2-98*
		Fabric steamers	IEC 60335-2-85*
		Electric fans	IEC 60335-2-80*
		Floor treatment machines	IEC 60335-2-10*
		Range hoods	IEC 60335-2-31*
		Towel rails	IEC 60335-2-43*
		Portable heating tools	IEC 60335-2-45*
		Foot warmers and heating mats	IEC 60335-2-81*
		Grills	IEC 60335-2-9*
		Cooking ranges	IEC 60335-2-6*
		Electric kitchen machines	IEC 60335-2-14*
		Room heaters	IEC 60335-2-30*
		Electric hair dryers	IEC 60335-2-23*
		Massage appliances	IEC 60335-2-32*
		Appliances for heating liquids	IEC 60335-2-15*
		Battery chargers	IEC 60335-2-29*
	Power transformers, power supplies, reactors and similar products
		Transformer for shavers	IEC 61558-2-5*
		Safety isolating transformers	IEC 61558-2-6*
		Transformers and power supplies for toys	IEC 61558-2-7*
		Switch mode power supply units and transformers	IEC 61558-2-16*
	Accessories and Connection Devices
		Switches	IEC 60669-1*
		Socket-outlets	BS 546* BS 1363-2*
		Appliance couplers	IEC 60320-1*
		Connecting devices	IEC 60998-1*
	Information Technology Equipment		IEC 60950-1*
		Copying machine
		Data processing equipment
		Facsimile machine
		Modem
		Telephone answering machines
		Typewriters
		Visual Display Units for computer
		Power supply for Information Technology Equipment
	Electronics, Entertainment		IEC 60065*
		Amplifiers
		Audio equipment
		Karaoke equipment
		Television
		Video equipment
	Remark: * Excluding items can be referred to Laboratory Accreditation Certificate (No. CNAS L4595) dated 15.01.2020 and the attached appendices for the scope of accreditation and excluding items issued by the China National Accreditation Service for Conformity Assessment (CNAS) dated 31.03.2020.

The Certification & Testing Center of Shenzhen LCS Certification Service Inc.

1/F., Xingyuan Industrial Park, Tongda Road, Bao’an Avenue, Bao’an District, Shenzhen, Guangdong, China

Tel: 86-0755-82591330
Fax: 86-0755-82591332

As detailed in the Laboratory Accreditation Certificate No. CNAS L4595 dated 04.06.2010 and the attached appendices for the scope of accreditation issued by the China National Accreditation Service for Conformity Assessment (CNAS) dated 18.10.2011.

• Household appliances :-
  • Vacuum cleaners and water-suction cleaning appliances (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, cleaning head impact and drop test, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, current-carrying hoses test, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Electric Fans (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, hardness of the blades edge, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Grills, toasters and similar portable cooking appliances (Excluding three-phase appliance, transient overvoltage, input power and current, heating, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, impact test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Kitchen machines (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, abnormal operation, mechanical hazard, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, structure, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Room heaters (Excluding three-phase appliance, transient overvoltage, surface temperature, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, abnormal operation, heater surface scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Appliances for skin or hair care (Excluding three-phase appliance, transient overvoltage, swivel connection heating, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Massage appliances (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Appliance for heating liquids (Excluding three-phase appliance, transient overvoltage, waterproof test, stand waterproof test, moisture resistance product larger than 400×450×580mm, EMC, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Battery chargers (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, vibration test, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Electric Irons (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, drop test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Shaver, hair clippers and similar appliances (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, impact test, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Oral hygiene appliances (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, abnormal test, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Insect killers (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, transformer insulation, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Air-cleaning appliances (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, transformer insulation, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Fixed immersion heaters (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Portable immersion heaters (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Humidifiers (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Fabric steamers (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
  • Electrical appliances for use with aquariums and garden ponds (Excluding three-phase appliance, transient overvoltage, waterproof test, moisture resistance product larger than 400×450×580mm, EMC, scratched test, dustproof test, automatic cord reels, aging of natural or synthetic rubber corrosion, oxygen bomb, software evaluation, water pressure test, back siphonage, thickness of electroplated, CTI test, resistance to rusting, radiation, toxicity and similar hazards)
• Luminaires
  • Fixed general purpose luminaires (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Recessed luminaires (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Portable general purpose luminaires (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Luminaires for stage lighting, television and film studios (outdoor and indoor) (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Lighting chains (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Luminaires for road and street lighting (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, wind speed test, endurance tests, resistance to tracking)
  • Luminaires for emergency lighting (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking, functional safety, changeover operation, high temperature operation, battery chargers for self-contained emergency luminaires, test devices for emergency operation)
  • Handlamps (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Floodlights (Excluding lampholder torque test, resistance to corrosion, vibration test, UV radiation, short circuit protection test, dustproof degree and waterproof degree, moisture resistance product larger than 400×450×580mm, endurance tests, resistance to tracking)
  • Self-ballasted lamps for general lighting (Excluding interchangeability, protection against electric shock, cap torque test)
  • Lamp controlgear (Excluding thermal endurance test for windings, moisture resistance product larger than 400×450×580mm, all torque test except for screw torque test, resistance to tracking)
  • d.c. or a.c. supplied electronic step-down convertors for filament lamps (Excluding moisture resistance product larger than 400×450×580mm, all torque test except for screw torque test, resistance to tracking)
  • a.c. supplied electronic ballasts for fluorescent lamps (Excluding moisture resistance product larger than 400×450×580mm, all torque test except for screw torque test, resistance to tracking)
  • Ballasts for fluorescent lamps (Excluding moisture resistance product larger than 400×450×580mm, all torque test except for screw torque test, resistance to tracking, thermal endurance test for windings)
  • d.c. or a.c. supplied electronic ballasts for discharge lamps (excluding fluorescent lamps) (Excluding moisture resistance product larger than 400×450×580mm, all torque test except for screw torque test, resistance to tracking)
  • d.c. or a.c. supplied electronic controlgear for LED modules (Excluding moisture resistance product larger than 400×450×580mm, all torque test except for screw torque test, resistance to tracking)
• Power transformers (Excluding vibration, IP classification, moisture resistance product larger than 400×450×580 mm, oxygen bomb test, scratch test, impact test, components test, rotation test, resistance to tracking, resistance to rusting)
• Safety isolating transformers (Excluding vibration, IP classification, moisture resistance product larger than 400×450×580 mm, oxygen bomb test, scratch test, impact test, components test, rotation test, resistance to tracking, resistance to rusting)
• Transformers for toys (Excluding vibration, IP classification, moisture resistance product larger than 400×450×580 mm, oxygen bomb test, scratch test, impact test, components test, rotation test, resistance to tracking, resistance to rusting)
• Transformers for switch mode power supplies (Excluding vibration, IP classification, moisture resistance product larger than 400×450×580 mm, oxygen bomb test, scratch test, impact test, components test, rotation test, resistance to tracking, resistance to rusting)
• Control transformers (Excluding vibration, IP classification, moisture resistance product larger than 400×450×580 mm, oxygen bomb test, scratch test, impact test, components test, rotation test, resistance to tracking, resistance to rusting)
• Isolating transformers (Excluding vibration, IP classification, moisture resistance product larger than 400×450×580 mm, oxygen bomb test, scratch test, impact test, components test, rotation test, resistance to tracking, resistance to rusting)
• Audio, video and similar electronic apparatus (Excluding volume is more than 400×450×580mm samples, radiation hazards, insulation material softening temperature, requirements for insulated winding wires for use without additional interleaved insulation, surge test, antenna coaxial sockets mounted on the apparatus, CTI, capacitor, protective devices, switch, photoelectric couplers, surge suppression varistors, power supply cord, mechanical strength of picture tubes and protection against the effects of implosion, glass fragmentation test)
• Information technology equipment (Only single phase equipment; Excluding capacitance capacity, overload test, endurance test, product larger than 400×450×580mm, measurement of transient voltages, material group and comparative tracking index, semiconductor devices, Annex U insulated winding wires for use without interleaved insulation, tests on coated printed boards, enclosed and sealed parts, spacing filled by insulating compound, component external terminations, AC power supply cords, TNV circuits, cathode ray tubes, flammable liquids, radiation, Annex A flammability test used Bunsen burner, greater than 5kV)
• Electric toy (Excluding fall test, component test, radiation, toxicity and similar hazards)